Iron Man
Automatic Fire Hose Reel
Automatic Fire Hose ReelModel List
Model | Type | Hose Diameter & Length | Height (A in mm) | Width (B in mm) | Depth (C in mm) | |
IMHR-10-B | Automatic,swinging arm,cabinet or wall mounted | 19mm*30m | 555 | 570-580 | 260 | |
IMHR-06-B | Automatic,swinging arm,cabinet or wall mounted | 25mm*30m | 600 | 610-680 | 230 | |
IMHR-13-A | Automatic,swinging pipe,cabinet or wall mounted | 19mm*30m | 580 | 620 | 260 | |
IMHR-15-A | Automatic,swinging pipe,cabinet or wall mounted | 25mm*30m | 600 | 640 | 260 |
Accessories
The manufacture of semi-rigid hose reel conform with BS EN 694:2014 standard.
The out layer is coated with UV inhibitor to prevent colour fading.
Hose | ID | OD | Max.WP | Min.BP | Adhesion |
19mm | 19mm | 25mm | 12Bar | 42Bar | >1.5Kn/m |
25mm | 25mm | 32mm | 12Bar | 42Bar | >1.5kN/m |
The plastic nozzle can realize SHUT, JET, and SPRAY, three kinds of operation.
Model No | Setting | Diameter | Inlet Size | Flow rate at 2bar/6bar (L/Min/Jet/Spray) | Throw Range at 2 bar |
N-03-1 | Jet/Spray | 6mm | 3/4″(19mm) | >24/41 | >11.2 |
N-03-2 | Jet/Spray | 8mm | 1″(25mm) | >39/68 | >11.2 |
Model No. | Size | Material | Working Pressure |
A | 1 1/2″-1″ Angle valve | Brass | >18Bar |
B | 3/4″-3/4″ Ball valve | Brass | >18Bar |
C | 1″-1″ Lock shield valve | Brass | >18Bar |
Fire Hose Rack Assembly
Fire Hose Rack AssemblySpecification
Model | Part Specification | Approval |
America Type (NH) – 1.5″ Fire hose rack assembly | 1.5″ Brass Angel hose valve | UL FM |
1.5″ Brass nipple with pin rack | ||
1.5″*30m single jacket, EPDM fire hose with NH brass coupling | FM | |
1.5″ NST Brass jet/spray nozzle | ||
America Type (NH) – 2.5″ Fire hose rack assembly | 2.5″ Brass Angel hose valve | UL FM |
2.5″ Brass nipple with pin rack | ||
2.5″*30m single jacket, EPDM fire hose with NH brass coupling | UL FM | |
2.5″ NST Brass jet/spray nozzle | ||
B.S – 2.5″ Fire hose rack assembly | 2.5″ Brass Angel hose valve | UL FM |
2.5″ Brass nipple with pin rack | ||
2.5″*30m single jacket, EPDM fire hose with NH brass coupling | UL FM | |
2.5″ NST Brass jet/spray nozzle |
Product description
IRON MAN fire hose rack assembly can be equipped with different types of valves and spray nozzles according to requirements.
Double Coating NBR Fire Hose
Double Coating NBR Fire HoseTechnical Data
Size(inch) | Hose type | Working Pressure | Bursting Pressure | Approval |
1-1/2 | Single Jacket | 250PSI | 750PSI | UL |
2-1/2 | Single Jacket | 250PSI | 750PSI | UL |
① NBR Rubber Liner
② Polyester Inner Jacket
③ NBR Outer Jacket
Product readme
IRON MAN Double Coating NBR Fire hose are manufactured and approved to UL Listed. Compliance to this very stringent standard ensures excellent durability and performance at all time.
Double Jacket Fire Hose with EPDM Rubber Liner
Double Jacket Fire Hose with EPDM Rubber LinerDouble Jacket Fire Hose with EPDM Rubber Liner
Double Jacket Fire Hose with EPDM Rubber LinerSpecification
Size(inch) | Hose type | Working Pressure | Bursting Pressure | Approval |
1-1/2 | Double Jacket | 300PSI | 900PSI | UL |
2-1/2 | Double Jacket | 300PSI | 900PSI | UL |
Feature
ight and compact structure
Corrosion resistance; anti-aging
Weather resistance; mold resistance
Anti-UV and long service life
Constructions
① EPDM Rubber Liner
② Polyester Inner Jacket
③ Polyester Outer jacket
Product readme
IRON MAN double jacket EPDM fire hose with liner passed UL, which makes sure the excellent durability and performance of the products.
Single Jacket Fire Hose with EPDM Rubber Liner
Single Jacket Fire Hose with EPDM Rubber LinerSingle Jacket Fire Hose with EPDM Rubber Liner
Single Jacket Fire Hose with EPDM Rubber LinerSpecification
Size (inch) | Hose type | Working Pressure | Bursting Pressure | Approval |
1-1/2 | Single Jacket | 250PSI | 750PSI | UL FM |
1-3/4 | Single Jacket | 250PSI | 750PSI | FM |
2 | Single Jacket | 250PSI | 750PSI | UL FM |
2-1/2 | Single Jacket | 250PSI | 750PSI | UL FM |
1-1/2 | Single Jacket | 150PSI | 450PSI | FM |
1-3/4 | Single Jacket | 150PSI | 450PSI | FM |
2 | Single Jacket | 150PSI | 450PSI | FM |
2-1/2 | Single Jacket | 150PSI | 450PSI | FM |
Feature
Light; compact structure
Corrosion resistance; anti-aging
Weather resistance; mold resistance
Anti-UV and long service life
Constructions
① EPDM rubber liner
② Hot melt/ rubber backing adhesive
③ Polyester jacket
Product readme
IRON MAN single jacket EPDM fire hose with liner passed UL and FM certification, which makes sure the excellent durability and performance of the products.
Concealed Fire Sprinkler
Concealed Fire SprinklerSpecifications
Model | PD007 | PD008 |
Style | Concealed Pendent | |
Response | Standard Response | Quick Response |
Bulb Nominal Dia | Job 5mm | Job 3mm |
Thread Size | NPT 1/2″ or R 1/2″ | |
Nominal Orifice Size | 1/2 inch | |
Nominal K-factor | 5.6(U.S)/80 (metric) | |
Max. Working Pressure | 175psi/1.2Mpa | |
Factory Hydrostatic Test | 100%@500psi | |
Min. Operating Pressure | 7psi/0.048Mpa | |
Cover Finish | White | |
Approval | UL | |
Available Temperature Rating
Temp. Classification | Ordinary | Intermediate | Intermediate |
Nominal Temp. Rating | 155℉/68℃ | 175℉/79℃ | 200℉/93℃ |
Max. Ambient Temp. Allowed | 135℉/57℃ | 155℉/68℃ | 180℉/82℃ |
Max. Recommended Ambient Temp. | 100℉/38℃ | 150℉/65℃ | 150℉/65℃ |
Glass Bulb Color | Red | Yellow | Green |
Upright & Pendent Fire Sprinkler
Upright & Pendent Fire SprinklerUpright & Pendent Fire Sprinkler
Upright & Pendent Fire SprinklerSpecifications
Model | JD001 | JD002 | JD003 | JD004 |
Style | Upright | Pendent | ||
Response | Standard Response | Quick Response | Standard Response | Quick Response |
Bulb Nominal Dia | Job 5mm | Job 3mm | Job 5mm | Job 3mm |
Thread Size | NPT 1/2″ or R 1/2″ | |||
Nominal Orifice Size | 1/2 inch | |||
Nominal K-factor | 5.6(U.S)/80 (metric) | |||
Max.Working Pressure | 175psi/1.2Mpa | |||
Factory Hydrostatic Test | 100%@500psi | |||
Min.Operating Pressure | 7psi/0.048Mpa | |||
Sprinkler Finish | Brass / Chrome / White | |||
Approval | UL | |||
Available Temperature Rating
Temp. Classification | Ordinary | Intermediate | Intermediate |
Nominal Temp. Rating | 155℉/68℃ | 175℉/79℃ | 200℉/93℃ |
Max. Ambient Temp. Allowed | 135℉/57℃ | 155℉/68℃ | 180℉/82℃ |
Max. Recommended Ambient Temp. | 100℉/38℃ | 150℉/65℃ | 150℉/65℃ |
Glass Bulb Color | Red | Yellow | Green |
Sidewall Fire Sprinkler
Sidewall Fire SprinklerSpecifications
Model | JD005 | JD006 |
Style | Horizontal | |
Response | Standard Response | Quick Response |
Bulb Nominal Dia | Job 5mm | Job 3mm |
Thread Size | NPT 1/2″ or R 1/2″ | |
Nominal Orifice Size | 1/2 inch | |
Nominal K-factor | 5.6(U.S)/80 (metric) | |
Max.Working Pressure | 175psi/1.2Mpa | |
Factory Hydrostatic Test | 100%@500psi | |
Min.Operating Pressure | 7psi/0.048Mpa | |
Sprinkler Finish | Brass / Chrome / White | |
Approval | UL | |
Available Temperature Rating
Temp. Classification | Ordinary | Intermediate | Intermediate |
Nominal Temp. Rating | 155℉/68℃ | 175℉/79℃ | 200℉/93℃ |
Max. Ambient Temp. Allowed | 135℉/57℃ | 155℉/68℃ | 180℉/82℃ |
Max. Recommended Ambient Temp. | 100℉/38℃ | 150℉/65℃ | 150℉/65℃ |
Glass Bulb Color | Red | Yellow | Green |
Flexible Metal Hose
Flexible Metal HoseHose Assembly Length mm(inch) | 700(28) | 1000(40) | 1200(48) | 1500(60) | 1800(72) | |
Maximum Number of Bends | 2 | 3 | 3 | 4 | 4 | |
Equivalent Length of 1″ Schedule 40 Pipe – ft.(m) | 1/2″ NPT | 20.3(6.2) | 25.8(7.9) | 29.5(9.0) | 35.3(10.8) | 41.5(12.5) |
3/4″ NPT | 15.5(4.7) | 20.0(6.0) | 23.0(7.0) | 28.0(8.5) | 33.1(10.0) |
Waterflow Detector
Waterflow DetectorDimension(mm)
Size | DN50 | DN65 | DN80 | DN100 | DN125 | DN150 | DN200 |
L | 84 | 92 | 104 | 133 | 160 | 187 | 239 |
H | 190 | 200 | 220 | 245 | 270 | 300 | 350 |
Nominal Pipe OD. | 60.3 | 73 | 88.9 | 114.3 | 141.3 | 168.3 | 219.1 |
Pipe Wall Thickness | 2.77-3.91 | 3.05-5.16 | 3.05-5.49 | 3.05-6.02 | 3.04-6.55 | 3.40-7.11 | 3.76-8.18 |
Material Specifications
No. | Part Name | Material |
1 | Saddle | DI,A536 65-45-12 |
2 | Holder | SS304+EPDM |
3 | Plate | Aluminum Alloy |
4 | Cover | Aluminum Alloy |
5 | Paddle | Plastic |
6 | Micro switch | Plastic |
7 | Gasket | EPDM |
8 | Retarding device | Plastic |
9 | Terminal Box | Plastic |
Retard Adjustment
The delay can be adjusted by rotating the retard adjustment knob from 0 to max setting. To adjust the setting, turn the adjustment knob clockwise to increase the delay, counterclockwise to decrease it. The time delay should be set at the minimum required to prevent false alarms.
Pressure Gauge
Pressure GaugeFeature
1. Certification: UL listed
2. Size: 4″ (100mm)
3. Accuracy grades: ±3/2/3% (ASME B40.100 B level)
4. Range: 0-300Psi (Water and air)
5. Working temperature
Air temperature: -40°F~140°F (-40°C~60°C)
Medium temperature: Highest to 140°F (+ 60°C)
Temperature error: initial temperature is 68°F (20°C), each rise or decrease by 18°F (10°C), additional error is + 0.4%
6. Bourdon tube: brass
7. Connection size: brass 1/4″NPT
8. Built-in spring: copper alloy
9. Dial: white aluminum stop pin
10. Indicator: black aluminum
11. Case: carbon steel or stainless steel
12. Window: Tempered glass