Shop
HEXAGONAL BOLT
HEXAGONAL BOLTDescription
Hexagonal Bolt is a multi purpose hex head bolt used in various equipment, structures & vehicles.
Material
- Black Iron
- Galvanized
- Tetanized
- Hi-tensile
- A325
- Grade 10.9
- Stainless 304
- Stainless 316
- Brass
Other Name
- Machine Bolt
- Hexagonal Capscrew
FLATHEAD COUNTERSUNK
FLATHEAD COUNTERSUNKDescription
Countersunk Bolt has a countersunk flat head with a philip or slotted hole that is unobstructive once fastened.
Material
- Galvanized
- Black Iron
- Stainless 304
- Brass
Other Name
- Panhead Bolt
- Junction Screw
- Philip Flathead Bolt
- Slotted Flathead Bolt
- Countersunk Screw
- Machine Screws
- Tapered Bolt
Variants
Junction Screw: Also known as utility box screw. It has a very specific thread and diameter used on junction boxes and other electrical equiptments
FLANGE BOLT
FLANGE BOLTDescription
Flange Bolt is designed to provide the same holding power as a washer. Identifiable by the ridge or skirt surrounding the bolt head.
Material
- Tetanized
- Stainless
ALLEN SETSCREW
ALLEN SETSCREWDescription
Allen Setscrew can be any screw used to fix a rotating part to a shaft. The set screw is driven through a threaded hole in the rotating part until it is tight against the shaft.
Material
- Hi-tensile
- Stainless 304
Other Names
- Headless Setscrew
- Socket Setscrew
ALLEN FLATHEAD
ALLEN FLATHEADDescription
Allen Flathead is a conical bolt, with flat outer face and tapering inner face allowing it to sink into the material. The angle of the screw is measured as the full angle of the cone.
Materials
- Hi-tensile
- Stainless 304
Other Names
- Allen Countersunk
- Socket Flat
- Tapered Socket Bolt
ALLEN CAPSCREW
ALLEN CAPSCREWDescription
Allen Capscrew is a type of cap screw with a hexagonal recessed drive. A capscrew is one which uses an Allen Wrench to fit into a socket on the screw.
Material
- Hi-tensile
- Stainless 304
Other Names
- Allen Bolt
- Socket Capscrew
ALLEN BUTTON
ALLEN BUTTONDescription
Allen Button is a type of Allen Capscrew with a cylindrical top.
Material
- Hi-tensile
- Stainless 304
Other Names
- Dome Head
- Socket Button
D6574II 8-Channel Digital Conference Mixer
D6574II 8-Channel Digital Conference Mixer| Input Impedance | MIC 7500Ω LINE 12KΩ |
| Output Impedance (Parallel) | MIC 300Ω LINE 32Ω |
| Output Impedance (Unparalleled) | AUX 16Ω |
| Line Output Impedance | 16Ω |
| Standard Input Level (Unparalleled) | MIC -50dBV LINE -10dBV |
| Standard Input Level (Parallel) | MIC -44dBV LINE -4dBV |
| Standard Output Level (Unparalleled) | MIC -32dBV LINE 0dBV |
| Standard Output Level (Parallel) | MIC -26dBV LINE 8dB |
| Line Output Level | -4.4dBV |
| Max Gain | 62dB |
| Frequency Response | 20Hz～20KHz（-3dB) |
| Background Noise | -80dBV |
| THD (1Kz 0dB output voltage) | ≤0.5% |
| SINAD | 78dB |
| Phantom | +48V |
| Control Output Voltage | +5V |
| Power Supply | AC 220V/50Hz |
| Power Consumption | 20W |
| Dimension (L×W×H) | 483×380×88 mm |
| Weight | 6.1Kg |
D7201 Full Digital Conference System Host
D7201 Full Digital Conference System Host| Item | Parameters |
| LINE IN voltage | 250±50mV |
| ALARM IN voltage | 250±50mV |
| LINE OUT voltage | 1000±100 mV |
| BALANCE OUT voltage | 2000±100 mV |
| Frequency response | 30Hz-20kHz（±3dB） |
| SNR | ≥80dB |
| Distortion | ≤0.5% |
| Maximum output power | 90W，4-channel PoE+48V power supply |
| Static power | ≤30W |
| Power supply | AC220V/50Hz/350W |
| Package dimension (L×W×H) | 525×480×185mm |
| Machine dimension (L×W×H) | 483×385×88 mm |
| Gross weight | 6.9kg |
| Net weight | 6.3kg |
D7642G 2.4G Base Station
D7642G 2.4G Base Station
D6260/D6261/D6262/D6263/D6264/D6265 Conference 8-pin DIN Wire
D6260/D6261/D6262/D6263/D6264/D6265 Conference 8-pin DIN Wire
D6237 Connecting Box for Embedded Units
D6237 Connecting Box for Embedded Units| Stand-by Power Consumption | <1W | Interface Type | 8-pin DIN /RJ45 x 4 | |
| Max Power Consumption | 2W | Dimensions | 140×110×36mm | |
| Working Power | DC 24V | Net Weight (with Mic Pole) | 0.75kg |
